AFR 195cc SBC Eliminator Street Cylinder Head
The Ultimate Bolt-on Emissions Legal Street Weapon
The AFR Emissions Legal (versions from 1969-94 with heat riser, CARB EO #D-250-2), 195cc intake port small block Chevy cylinder heads are available in your choice of straight or L98 angle plug versions. These cylinder heads feature a 65cc or 75cc combustion chamber with a 64cc exhaust port and a 3/4” thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm 2.050 (comp package has 2.080) intake and 1.600 exhaust with AFR’s hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of 2000 rpm to 6500rpm, 23° valve angle, and standard valve spacing make this the perfect street head for 350 cid to 400 cid engines from 1955-86. Available for 1987 to present engines with center bolt valve covers and 2 center intake bolts at 72° angle (AFR #1041). No special parts are required (see footnotes here). Dual valve cover bolt pattern is standard. Exhaust port is raised .100 over GM L98 cylinder heads.
Note: Hydraulic roller cams typically experience valve float at 6200-6400 rpm because of their fast ramp rates. AFR suggest you upgrade your springs to AFR part #8605, 1.290 O.D. with higher spring pressures and use our Patented “Hydra Rev Kit” to reduce chances of valve float associated with rpm 6200 or higher.
195cc SBC Aluminum Cylinder Head Street Flow Chart
Tested on 4.060 Bore
195cc SBC Aluminum Cylinder Head Comp. Flow Chart
Tested on 4.060 Bore
Basic Package Components
100% CNC Ported Combustion Chambers
100% CNC Ported Exhaust Ports
100% CNC Ported Intake Ports
3-angle Radiused Valve Job
AFR #7252
Bead Lock Intake Valve, 2.050" stud mount
AFR #7250
Bead Lock Exhaust Valve, 1.600" stud mount, 58cc
AFR #8017
1.290" OD Hydraulic Dual Valve Spring, 135 lbs on seat,
Specifications, Features, and Optional Supporting Components
65-70 ft. lbs
Head Torque
55-60 ft. lbs
Rocker Stud Torque
Comp Pkg #6820
Intake Gasket 1.310x2.180 w/ 3/8" radius, Fel-Pro #1206
Important: Do not port match your intake manifold to Fel-Pro gasket as it does not precisely fit AFR heads.
AFR #6310
SB Chevy Head Bolt Kit, ARP #134-3701
AFR #6305
SB Chevy Head Stud Kit, 12 Point Nuts, ARP #234-4301
AC FR3LS or 41629
Spark Plug Starting Range
65cc or 75cc
Combustion Chambers
Can be cut to 1.625, no deeper
Spring Pocket
Standard GM L98
Valve Spacing
Standard, GM L98
Rocker Arms
23°
Valve Angle
.008" per cc
Angle Mill (Milling options available)
.006" per cc
Flat Mill (Milling options available)
Note: Milling head deck will affect flow numbers. Angle mills might require .120 thick intake gasket. |
