Gen III Heads
Manufactured from A356 aluminum using permanent-mold technology, AFR's 185cc As-Cast Black Hawk Gen III Hemi Aluminum Cylinder Heads are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .600” of lift. Please see footnotes for additional information.
| Included Components | |
| As-Cast Exhaust Ports, As-Cast Combustion Chambers | |
| As-Cast Intake Ports | |
| Competition 5-angle Valve Job | |
| 8mm Bead Lock Intake Valve 2.050” x 5.108” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.590” x 5.135” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Chrome Moly Retainers 1.245” O.D x .880” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 185cc Gen III Hemi As Cast Flow Chart | |||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | |
| Int | 160 | 234 | 293 | 324 | 330 | 332 | 334 |
| Exh | 123 | 167 | 207 | 218 | 220 | 221 | 222 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.422 in2
|
| Intake Port Volume |
185cc
|
| Intake Port Dimension |
1.750"H x 1.850"
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.550"H x 1.760" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
| CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. | |
Manufactured from A356 aluminum using permanent-mold technology, AFR's 185cc As-Cast Black Hawk Gen III Hemi Aluminum Cylinder Heads are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .600” of lift. Please see footnotes for additional information.
| Included Components | |
| As-Cast Exhaust Ports, As-Cast Combustion Chambers | |
| As-Cast Intake Ports | |
| Competition 5-angle Valve Job | |
| 8mm Bead Lock Intake Valve 2.050” x 5.108” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.590” x 5.135” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Chrome Moly Retainers 1.245” O.D x .880” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 185cc Gen III Hemi As Cast Flow Chart | |||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | |
| Int | 160 | 234 | 293 | 324 | 330 | 332 | 334 |
| Exh | 123 | 167 | 207 | 218 | 220 | 221 | 222 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.422 in2
|
| Intake Port Volume |
185cc
|
| Intake Port Dimension |
1.750"H x 1.850"
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.550"H x 1.760" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
| CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. | |
Manufactured from A356 aluminum using permanent-mold technology, AFR's 185cc As-Cast Black Hawk Gen III Hemi Aluminum Cylinder Heads are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .600” of lift. Please see footnotes for additional information.
| Included Components | |
| As-Cast Exhaust Ports, As-Cast Combustion Chambers | |
| As-Cast Intake Ports | |
|
Competition 5-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.050” x 5.108” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.590” x 5.135” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Chrome Moly Retainers 1.245” O.D x .880” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 185cc Gen III Hemi As Cast Flow Chart | |||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | |
| Int | 160 | 234 | 293 | 324 | 330 | 332 | 334 |
| Exh | 123 | 167 | 207 | 218 | 220 | 221 | 222 |
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.422 in2
|
| Intake Port Volume |
185cc
|
| Intake Port Dimension |
1.750"H x 1.850"
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.550"H x 1.760" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Head Gasket |
FelPro 26588R032 and 26588L032
|
| Head Gasket |
Cometic C5750-030 and C5749-030
|
| Intake Port Gasket |
OE Rubber Seal
|
| Hellcat/Blower Intake Port Gasket |
68271246AA
|
| Important: Do not use your OE gasket as a template to port match your intake manifold. | |
| Exhaust Port Gasket |
OE
|
| Head Bolts |
OE
|
| Head Studs |
OE
|
| Rocker Arms (For Optimized Geometry) |
OE
|
| Shaft Mount Rocker Arms T&D | |
| Important: Do not use TD 8630 Adjustable Shaft Mount Rockers. Adjuster nut hits the valve cover and cannot be used. | |
| Suggested Manifold |
OE
|
| Spark Plug Starting Range |
Autolite AR-5324 Race Plug
|
Manufactured from A356 aluminum using permanent-mold technology, AFR's 185cc As-Cast Black Hawk Gen III Hemi Aluminum Cylinder Heads are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .600” of lift. Please see footnotes for additional information.
| Included Components | |
| As-Cast Exhaust Ports, As-Cast Combustion Chambers | |
| As-Cast Intake Ports | |
|
Competition 5-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.050” x 5.108” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.590” x 5.135” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Chrome Moly Retainers 1.245” O.D x .880” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 185cc Gen III Hemi As Cast Flow Chart | |||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | |
| Int | 160 | 234 | 293 | 324 | 330 | 332 | 334 |
| Exh | 123 | 167 | 207 | 218 | 220 | 221 | 222 |
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.422 in2
|
| Intake Port Volume |
185cc
|
| Intake Port Dimension |
1.750"H x 1.850"
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.550"H x 1.760" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Head Gasket |
FelPro 26588R032 and 26588L032
|
| Head Gasket |
Cometic C5750-030 and C5749-030
|
| Intake Port Gasket |
OE Rubber Seal
|
| Hellcat/Blower Intake Port Gasket |
68271246AA
|
| Important: Do not use your OE gasket as a template to port match your intake manifold. | |
| Exhaust Port Gasket |
OE
|
| Head Bolts |
OE
|
| Head Studs |
OE
|
| Rocker Arms (For Optimized Geometry) |
OE
|
| Shaft Mount Rocker Arms T&D | |
| Important: Do not use TD 8630 Adjustable Shaft Mount Rockers. Adjuster nut hits the valve cover and cannot be used. | |
| Suggested Manifold |
OE
|
| Spark Plug Starting Range |
Autolite AR-5324 Race Plug
|
Manufactured from A356 aluminum using permanent-mold technology, AFR's 212cc Black Hawk Gen III Hemi Aluminum Cylinder Heads feature 100% CNC ported intake ports, exhaust ports & combustion chambers. They are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .600” of lift, these heads are available in three different versions. Please see footnotes for additional information.
| Included Components | |
| 100% CNC Exhaust Ports, 100% CNC Combustion Chambers | |
| 100% CNC Intake Ports | |
|
Competition 5-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.125” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Chrome Moly Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 212cc Gen III Hemi As Cast Flow Chart | ||||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | .700 | |
| Int | 162 | 237 | 304 | 352 | 369 | 373 | 374 | 375 |
| Exh | 125 | 166 | 213 | 236 | 242 | 248 | 252 | 254 |
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.877 in2
|
| Intake Port Volume |
212cc
|
| Intake Port Dimension |
1.91"Wx1.91"H
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.865"Wx1.285"H
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69/73cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Intake Port Gasket |
OE Rubber Seal
|
| Hellcat/Blower Intake Port Gasket |
68271246AA
|
| Important: Do not use your OE gasket as a template to port match your intake manifold. | |
| Exhaust Port Gasket |
OE
|
| Head Bolts |
OE
|
| Head Studs |
OE
|
| Rocker Arms (For Optimized Geometry) |
OE
|
| Shaft Mount Rocker Arms T&D | |
| Important: Do not use TD 8630 Adjustable Shaft Mount Rockers. Adjuster nut hits the valve cover and cannot be used. | |
| Suggested Manifold |
OE
|
| Spark Plug Starting Range |
Autolite AR-5324 Race Plug
|
Manufactured from A356 aluminum using permanent-mold technology, AFR's 212cc Black Hawk Gen III Hemi Aluminum Cylinder Heads feature 100% CNC ported intake ports, exhaust ports & combustion chambers. They are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .600” of lift, these heads are available in three different versions. Please see footnotes for additional information.
| Included Components | |
| 100% CNC Exhaust Ports, 100% CNC Combustion Chambers | |
| 100% CNC Intake Ports | |
|
Competition 5-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.125” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Chrome Moly Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 212cc Gen III Hemi As Cast Flow Chart | ||||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | .700 | |
| Int | 162 | 237 | 304 | 352 | 369 | 373 | 374 | 375 |
| Exh | 125 | 166 | 213 | 236 | 242 | 248 | 252 | 254 |
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.877 in2
|
| Intake Port Volume |
212cc
|
| Intake Port Dimension |
1.91"Wx1.91"H
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.865"Wx1.285"H
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69/73cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Intake Port Gasket |
OE Rubber Seal
|
| Hellcat/Blower Intake Port Gasket |
68271246AA
|
| Important: Do not use your OE gasket as a template to port match your intake manifold. | |
| Exhaust Port Gasket |
OE
|
| Head Bolts |
OE
|
| Head Studs |
OE
|
| Rocker Arms (For Optimized Geometry) |
OE
|
| Shaft Mount Rocker Arms T&D | |
| Important: Do not use TD 8630 Adjustable Shaft Mount Rockers. Adjuster nut hits the valve cover and cannot be used. | |
| Suggested Manifold |
OE
|
| Spark Plug Starting Range |
Autolite AR-5324 Race Plug
|
Manufactured from A356 aluminum using permanent-mold technology, AFR's 212cc Black Hawk Gen III Hemi Aluminum Cylinder Heads feature 100% CNC ported intake ports, exhaust ports & combustion chambers. They are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .600” of lift, these heads are available in three different versions. Please see footnotes for additional information.
| Included Components | |
| 100% CNC Exhaust Ports, 100% CNC Combustion Chambers | |
| 100% CNC Intake Ports | |
|
Competition 5-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.125” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Titanium Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 212cc Gen III Hemi As Cast Flow Chart | ||||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | .700 | |
| Int | 162 | 237 | 304 | 352 | 369 | 373 | 374 | 375 |
| Exh | 125 | 166 | 213 | 236 | 242 | 248 | 252 | 254 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.877 in2
|
| Intake Port Volume |
212cc
|
| Intake Port Dimension |
1.91"Wx1.91"H
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.865"Wx1.285"H
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69/73cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Intake Port Gasket |
OE Rubber Seal
|
| Hellcat/Blower Intake Port Gasket |
68271246AA
|
| Important: Do not use your OE gasket as a template to port match your intake manifold. | |
| Exhaust Port Gasket |
OE
|
| Head Bolts |
OE
|
| Head Studs |
OE
|
| Rocker Arms (For Optimized Geometry) |
OE
|
| Shaft Mount Rocker Arms T&D | |
| Important: Do not use TD 8630 Adjustable Shaft Mount Rockers. Adjuster nut hits the valve cover and cannot be used. | |
| Suggested Manifold |
OE
|
| Spark Plug Starting Range |
Autolite AR-5324 Race Plug
|
Manufactured from A356 aluminum using permanent-mold technology, AFR's 212cc Black Hawk Gen III Hemi Aluminum Cylinder Heads feature 100% CNC ported intake ports, exhaust ports & combustion chambers. They are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .600” of lift, these heads are available in three different versions. Please see footnotes for additional information.
| Included Components | |
| 100% CNC Exhaust Ports, 100% CNC Combustion Chambers | |
| 100% CNC Intake Ports | |
|
Competition 5-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.125” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Titanium Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 212cc Gen III Hemi As Cast Flow Chart | ||||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | .700 | |
| Int | 162 | 237 | 304 | 352 | 369 | 373 | 374 | 375 |
| Exh | 125 | 166 | 213 | 236 | 242 | 248 | 252 | 254 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.877 in2
|
| Intake Port Volume |
212cc
|
| Intake Port Dimension |
1.91"Wx1.91"H
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.865"Wx1.285"H
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69/73cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Intake Port Gasket |
OE Rubber Seal
|
| Hellcat/Blower Intake Port Gasket |
68271246AA
|
| Important: Do not use your OE gasket as a template to port match your intake manifold. | |
| Exhaust Port Gasket |
OE
|
| Head Bolts |
OE
|
| Head Studs |
OE
|
| Rocker Arms (For Optimized Geometry) |
OE
|
| Shaft Mount Rocker Arms T&D | |
| Important: Do not use TD 8630 Adjustable Shaft Mount Rockers. Adjuster nut hits the valve cover and cannot be used. | |
| Suggested Manifold |
OE
|
| Spark Plug Starting Range |
Autolite AR-5324 Race Plug
|
Manufactured from A356 aluminum using permanent-mold technology, AFR's 224cc Black Hawk Gen III Hemi Aluminum Cylinder Heads feature 100% CNC ported intake ports, exhaust ports & combustion chambers. They are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .650” of lift, these heads are available in three different versions. Please see footnotes for additional information.
| Included Components | |
| 100% CNC Exhaust Ports, 100% CNC Combustion Chambers | |
| 100% CNC Intake Ports | |
|
Competition 5-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.165” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.270” OD Hydraulic Roller Dual Valve Drag Race Spring, 155 lbs. on seat, .650” maximum lift, Max RPM 7000-7200 (upgrades available) | |
| 10° Titanium Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 224cc Gen III Hemi As Cast Flow Chart | ||||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | .700 | |
| Int | 160 | 235 | 303 | 355 | 373 | 380 | 385 | 390 |
| Exh | 127 | 170 | 215 | 238 | 242 | 251 | 255 | 258 |
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
3.010 in2
|
| Intake Port Volume |
224cc
|
| Intake Port Dimension |
1.95"Wx1.95"H
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.865"Wx1.285"H
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69/73cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Intake Port Gasket |
OE Rubber Seal
|
| Hellcat/Blower Intake Port Gasket |
68271246AA
|
| Important: Do not use your OE gasket as a template to port match your intake manifold. | |
| Exhaust Port Gasket |
OE
|
| Head Bolts |
OE
|
| Head Studs |
OE
|
| Rocker Arms (For Optimized Geometry) |
OE
|
| Shaft Mount Rocker Arms T&D | |
| Important: Do not use TD 8630 Adjustable Shaft Mount Rockers. Adjuster nut hits the valve cover and cannot be used. | |
| Suggested Manifold |
OE
|
| Spark Plug Starting Range |
Autolite AR-5324 Race Plug
|
Manufactured from A356 aluminum using permanent-mold technology, AFR's 224cc Black Hawk Gen III Hemi Aluminum Cylinder Heads feature 100% CNC ported intake ports, exhaust ports & combustion chambers. They are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .650” of lift, these heads are available in three different versions. Please see footnotes for additional information.
| Included Components | |
| 100% CNC Exhaust Ports, 100% CNC Combustion Chambers | |
| 100% CNC Intake Ports | |
|
Competition 5-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.165” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.270” OD Hydraulic Roller Dual Valve Drag Race Spring, 155 lbs. on seat, .650” maximum lift, Max RPM 7000-7200 (upgrades available) | |
| 10° Titanium Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 224cc Gen III Hemi As Cast Flow Chart | ||||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | .700 | |
| Int | 160 | 235 | 303 | 355 | 373 | 380 | 385 | 390 |
| Exh | 127 | 170 | 215 | 238 | 242 | 251 | 255 | 258 |
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
3.010 in2
|
| Intake Port Volume |
224cc
|
| Intake Port Dimension |
1.95"Wx1.95"H
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.865"Wx1.285"H
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69/73cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Intake Port Gasket |
OE Rubber Seal
|
| Hellcat/Blower Intake Port Gasket |
68271246AA
|
| Important: Do not use your OE gasket as a template to port match your intake manifold. | |
| Exhaust Port Gasket |
OE
|
| Head Bolts |
OE
|
| Head Studs |
OE
|
| Rocker Arms (For Optimized Geometry) |
OE
|
| Shaft Mount Rocker Arms T&D | |
| Important: Do not use TD 8630 Adjustable Shaft Mount Rockers. Adjuster nut hits the valve cover and cannot be used. | |
| Suggested Manifold |
OE
|
| Spark Plug Starting Range |
Autolite AR-5324 Race Plug
|
Manufactured from A356 aluminum using permanent-mold technology, AFR's 224cc Black Hawk Gen III Hemi Aluminum Cylinder Heads feature 100% CNC ported intake ports, exhaust ports & combustion chambers. They are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .650” of lift, these heads are available in three different versions. Please see footnotes for additional information.
| Included Components | |
| 100% CNC Exhaust Ports, 100% CNC Combustion Chambers | |
| 100% CNC Intake Ports | |
|
Competition 5-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.165” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.270” OD Hydraulic Roller Dual Valve Drag Race Spring, 155 lbs. on seat, .650” maximum lift, Max RPM 7000-7200 (upgrades available) | |
| 10° Titanium Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 224cc Gen III Hemi As Cast Flow Chart | ||||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | .700 | |
| Int | 160 | 235 | 303 | 355 | 373 | 380 | 385 | 390 |
| Exh | 127 | 170 | 215 | 238 | 242 | 251 | 255 | 258 |
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
3.010 in2
|
| Intake Port Volume |
224cc
|
| Intake Port Dimension |
1.95"Wx1.95"H
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.865"Wx1.285"H
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69/73cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
| CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. | |
|
Recommended Components: |
|
| Intake Port Gasket |
OE Rubber Seal
|
| Hellcat/Blower Intake Port Gasket |
68271246AA
|
| Important: Do not use your OE gasket as a template to port match your intake manifold. | |
| Exhaust Port Gasket |
OE
|
| Head Bolts |
OE
|
| Head Studs |
OE
|
| Rocker Arms (For Optimized Geometry) |
OE
|
| Shaft Mount Rocker Arms T&D | |
| Important: Do not use TD 8630 Adjustable Shaft Mount Rockers. Adjuster nut hits the valve cover and cannot be used. | |
| Suggested Manifold |
OE
|
| Spark Plug Starting Range |
Autolite AR-5324 Race Plug
|
Manufactured from A356 aluminum using permanent-mold technology, AFR's 224cc Black Hawk Gen III Hemi Aluminum Cylinder Heads feature 100% CNC ported intake ports, exhaust ports & combustion chambers. They are outfitted with our trademarked .750” thick head deck to meet the boost and power demands of today’s OEM and aftermarket engines. We have improved the water jacketing for enhanced cooling while retaining a minimum of .200” port to water jacket thickness. Machine option available to add bolt hole and dowel provisioning for Hellcat superchargers. Designed for use with hydraulic roller camshafts up to .650” of lift, these heads are available in three different versions. Please see footnotes for additional information.
| Included Components | |
| 100% CNC Exhaust Ports, 100% CNC Combustion Chambers | |
| 100% CNC Intake Ports | |
|
Competition 5-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.165” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.270” OD Hydraulic Roller Dual Valve Drag Race Spring, 155 lbs. on seat, .650” maximum lift, Max RPM 7000-7200 (upgrades available) | |
| 10° Titanium Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 224cc Gen III Hemi As Cast Flow Chart | ||||||||
| .200 | .300 | .400 | .500 | .550 | .600 | .650 | .700 | |
| Int | 160 | 235 | 303 | 355 | 373 | 380 | 385 | 390 |
| Exh | 127 | 170 | 215 | 238 | 242 | 251 | 255 | 258 |
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
3.010 in2
|
| Intake Port Volume |
224cc
|
| Intake Port Dimension |
1.95"Wx1.95"H
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.865"Wx1.285"H
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69/73cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
| CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. | |
|
Recommended Components: |
|
| Intake Port Gasket |
OE Rubber Seal
|
| Hellcat/Blower Intake Port Gasket |
68271246AA
|
| Important: Do not use your OE gasket as a template to port match your intake manifold. | |
| Exhaust Port Gasket |
OE
|
| Head Bolts |
OE
|
| Head Studs |
OE
|
| Rocker Arms (For Optimized Geometry) |
OE
|
| Shaft Mount Rocker Arms T&D | |
| Important: Do not use TD 8630 Adjustable Shaft Mount Rockers. Adjuster nut hits the valve cover and cannot be used. | |
| Suggested Manifold |
OE
|
| Spark Plug Starting Range |
Autolite AR-5324 Race Plug
|
AFR’s Street Hawk GENIII Cylinder Head is manufactured fromA356 aluminumusing permanent-mold technologyfor better port,chamber,and quality finishes.AFR's195ccStreetHawk Gen III Hemi Aluminum Cylinder Heads features ourstreetperformance*CNC ported intakerunners,exhaust ports & combustion chambers.These cylinder headsare outfitted with our trademarked .750” thick head deck tomeet the boost and power demands of today’s OEM and aftermarket engines. Wehave improved the water jacketing for enhanced cooling while retaining a minimumof .200” port to water jacket thickness.Equippedfor use with hydraulic rollercamshafts up to .600” of lift. The AFR Street Hawk GENIII cylinder heads are aperfect match to improve the performance of your stock or slightly modifiedengine.Please see footnotes for additional information.
| Included Components | |
| AFR Street Performance CNC Exhaust Ports | |
| AFR Street Performance CNC Intake Runners | |
| AFR Street PerformanceCNC Combustion Chambers | |
| Competition 5-angle Valve Job | |
| 8mm Bead Lock Intake Valve 2.125” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Chrome Moly Retainers 1.245” O.D x .880” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 195cc Gen III Hemi As Cast Flow Chart | |||||||
| .200 | .300 | .400 | .500 | .600 | .600 | .700 | |
| Int | 160 | 235 | 297 | 331 | 340 | 342 | 344 |
| Exh | 121 | 170 | 220 | 236 | 243 | 245 | 247 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.422 in2
|
| Intake Port Volume |
195cc
|
| Intake Port Dimension |
1.750"H x 1.850"
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.550"H x 1.760" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
| CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. | |
AFR’s Street Hawk GENIII Cylinder Head is manufactured fromA356 aluminumusing permanent-mold technologyfor better port,chamber,and quality finishes.AFR's195ccStreetHawk Gen III Hemi Aluminum Cylinder Heads features ourstreetperformance*CNC ported intakerunners,exhaust ports & combustion chambers.These cylinder headsare outfitted with our trademarked .750” thick head deck tomeet the boost and power demands of today’s OEM and aftermarket engines. Wehave improved the water jacketing for enhanced cooling while retaining a minimumof .200” port to water jacket thickness.Equippedfor use with hydraulic rollercamshafts up to .600” of lift. The AFR Street Hawk GENIII cylinder heads are aperfect match to improve the performance of your stock or slightly modifiedengine.Please see footnotes for additional information.
| Included Components | |
| AFR Street Performance CNC Exhaust Ports | |
| AFR Street Performance CNC Intake Runners | |
| AFR Street PerformanceCNC Combustion Chambers | |
| Competition 5-angle Valve Job | |
| 8mm Bead Lock Intake Valve 2.125” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Chrome Moly Retainers 1.245” O.D x .880” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 195cc Gen III Hemi As Cast Flow Chart | |||||||
| .200 | .300 | .400 | .500 | .600 | .600 | .700 | |
| Int | 160 | 235 | 297 | 331 | 340 | 342 | 344 |
| Exh | 121 | 170 | 220 | 236 | 243 | 245 | 247 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.422 in2
|
| Intake Port Volume |
195cc
|
| Intake Port Dimension |
1.750"H x 1.850"
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.550"H x 1.760" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
| CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. | |
AFR’s Street Hawk GENIII Cylinder Head is manufactured fromA356 aluminumusing permanent-mold technologyfor better port,chamber,and quality finishes.AFR's195ccStreetHawk Gen III Hemi Aluminum Cylinder Heads features ourstreetperformance*CNC ported intakerunners,exhaust ports & combustion chambers.These cylinder headsare outfitted with our trademarked .750” thick head deck tomeet the boost and power demands of today’s OEM and aftermarket engines. Wehave improved the water jacketing for enhanced cooling while retaining a minimumof .200” port to water jacket thickness.Equippedfor use with hydraulic rollercamshafts up to .600” of lift. The AFR Street Hawk GENIII cylinder heads are aperfect match to improve the performance of your stock or slightly modifiedengine.Please see footnotes for additional information.
| Included Components | |
| AFR Street Performance CNC Exhaust Ports | |
| AFR Street Performance CNC Intake Runners | |
| AFR Street PerformanceCNC Combustion Chambers | |
| Competition 5-angle Valve Job | |
| 8mm Bead Lock Intake Valve 2.125” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Chrome Moly Retainers 1.245” O.D x .880” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 195cc Gen III Hemi As Cast Flow Chart | |||||||
| .200 | .300 | .400 | .500 | .600 | .600 | .700 | |
| Int | 160 | 235 | 297 | 331 | 340 | 342 | 344 |
| Exh | 121 | 170 | 220 | 236 | 243 | 245 | 247 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.422 in2
|
| Intake Port Volume |
195cc
|
| Intake Port Dimension |
1.750"H x 1.850"
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.550"H x 1.760" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
| CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. | |
AFR’s Street Hawk GENIII Cylinder Head is manufactured fromA356 aluminumusing permanent-mold technologyfor better port,chamber,and quality finishes.AFR's195ccStreetHawk Gen III Hemi Aluminum Cylinder Heads features ourstreetperformance*CNC ported intakerunners,exhaust ports & combustion chambers.These cylinder headsare outfitted with our trademarked .750” thick head deck tomeet the boost and power demands of today’s OEM and aftermarket engines. Wehave improved the water jacketing for enhanced cooling while retaining a minimumof .200” port to water jacket thickness.Equippedfor use with hydraulic rollercamshafts up to .600” of lift. The AFR Street Hawk GENIII cylinder heads are aperfect match to improve the performance of your stock or slightly modifiedengine.Please see footnotes for additional information.
| Included Components | |
| AFR Street Performance CNC Exhaust Ports | |
| AFR Street Performance CNC Intake Runners | |
| AFR Street PerformanceCNC Combustion Chambers | |
| Competition 5-angle Valve Job | |
| 8mm Bead Lock Intake Valve 2.125” x 5.135” O.A.L. | |
| 8mm Bead Lock Exhaust Valve 1.650” x 5.150” O.A.L. | |
| PAC Racing Springs 1.290” OD Hydraulic Roller Dual Valve Drag Race Spring, 140 lbs. on seat, .600” maximum lift, Max RPM 6300-6500 (upgrades available) | |
| 10° Chrome Moly Retainers 1.245” O.D x .880” I.D x .655” I.D | |
| 10° 8mm Valve Keepers with lashcap recess | |
| Hardened Valve Spring Cup 1.380" O.D x 1.300" I.D x .570" I.D | |
| Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep | |
| Exhaust Valve Seats 1.696" O.D x 1.35" I.D x .375" Deep | |
| Intake Bronze Valve Guides 8mm x 2.100" O.A.L | |
| Exhaust Bronze Valve Guides 8mm x 2.100" O.A.L | |
| 195cc Gen III Hemi As Cast Flow Chart | |||||||
| .200 | .300 | .400 | .500 | .600 | .600 | .700 | |
| Int | 160 | 235 | 297 | 331 | 340 | 342 | 344 |
| Exh | 121 | 170 | 220 | 236 | 243 | 245 | 247 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| MSCA Minimum Cross Section Area |
2.422 in2
|
| Intake Port Volume |
195cc
|
| Intake Port Dimension |
1.750"H x 1.850"
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
64cc
|
| Exhaust Port Dimension |
1.550"H x 1.760" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size (As-Cast) |
69cc
|
| Valve Cover Bolt Pattern |
Perimeter Bolt
|
| Valve Angle |
Stock
|
| Valve Spring Pocket Diameter |
1.625"
|
| Max Valve Spring Pocket Machining |
Do Not Machine
|
| Deck Thickness |
.750"
|
| Minimum Bore Diameter |
3.197"
|
| Flat Mill |
.006" per cc/ Maximum 62cc as cast chamber
|
| Angle Mill |
.009" per cc/ Maximum 60cc as cast chamber
|
| Note: Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions |
14mm x 1"
|
| CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. | |
You’ll be first to know about Air Flow Research products, discounts and special events!
© Copyright 2024 - airflowresearch.com ®
Designed By Admark | Powered By Nebhub
