$0.00
  1. Home
  2. Small Block Ford
  3. Cylinder Heads
  4. Renegade CNC

205CC SBF COMPETITION CYLINDER HEAD

prev next
(Review it) Love it

$2,753.00

SOLD AS A PAIR

Warning:Cancer and Reproductive Harm - www.P65Warnings.ca.gov
QUESTIONS?
INSTRUCTIONS

Option 1:



AFR's 205cc "Competition" cylinder heads feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for race applications and very agressive street/strip builds operating up to 7400 RPM. Maximum intake flow potential @0.750" lift is 331 CFM.


Basic Package Components
100% CNC Ported Combustion Chambers
100% CNC Ported Exhaust Ports
100% CNC Ported Intake Ports
Competition 5-angle Valve Job

 
8mm Bead Lock Intake Valve, 2.080" x 5.000" Overall Valve Length
8mm Bead Lock Exhaust Valve, 1.600" x 5.030" Overall Valve Length
PAC Racing Spring 1.550" OD Solid Roller Dual Valve Spring, 220 lbs on seat, .710" maximum lift, Max RPM 7200-7400 (upgrades available)
10° Steel Retainers 1.500" O.D x 1.120" I.D x .705" I.D
10° Bead Lock Valve Keepers with lashcap recess
ARP 7/16" Rocker Studs
Adjustable 5/16" Guide Plates
Viton Valve Seals .600" O.D x .495" I.D
Hardened Valve Spring I.D Locator 1.550" O.D x .705" I.D
Ductile Iron Intake Valve Seats 2.131" O.D x 1.680" I.D x .375" Deep
Ductile Iron Exhaust Valve Seats 1.650" O.D x 1.350" I.D x .375" Deep
8 mm Bronze Valve Guides .502" O.D x 2.100" O.A.L

205cc Street Head Flow Chart
  .200 .300 .400 .500 .550 .600 .700 .750
Int 139 199 251 285 297 308 317 320
Exh 121 170 206 219 227 230 232 234

Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe


Specifications & Features:
Material
A356 Aluminum
Intake Port Volume
205cc
Intake Port Dimension
2.115" H x 1.300" W x 3/8 Radius
Intake Port Location
Stock
Exhaust Port Volume
70cc
Exhaust Port Dimension
1.400" H x 1.400" W
Exhaust Port Location
Raised .125"
Combustion Chamber Size
58cc or 72cc
Valve Cover Bolt Pattern
Perimeter Bolt
Valve Angle
20°
Valve Spring Pocket Diameter
1.580" O.D
Max Valve Spring Pocket Machining
1.625" O.D
Deck Thickness
.750"
Minimum Bore Diameter
4.000"
Flat Mill
.006" per cc 54cc Max (from 58cc); 68cc Max (from 72cc);
Angle Mill
.009" per cc 48cc Max (from 58cc); 62cc Max (from 72cc);
Minimum Cross Sectional Area
2.165 sq. in.
Spark Plug Dimensions
14mm x .750" w/Gasket Seat
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING.
Head Bolt Diameter
1/2"
 
Recommended Components:
Intake Port Gasket, 1.200" X 2.000" w/ 3/8" radius, Fel-Pro #1262
Important: Do not use your AFR gasket as a template to port match your intake manifold as one AFR gasket is used for many AFR runner volumes.
Exhaust Port Gasket, Fel-Pro #1487
Head Gasket, Fel-Pro #1011-1
SB Ford 1/2" Bolt Head Bolt Kit, ARP #154-3603
SB Ford 1/2" Bolt Head Stud Kit, ARP #254-4503
1/2" Bolt - 7/16" Thread Head Bolts, ARP 254-3708
Head Bolt Washer Kit, Manley
Stud Girdle
Suggested Manifold
Super Vic or Vic Jr.
Spark Plug Starting Range
Autolite 3922 - Race Gas
Spark Plug Starting Range
Autolite 3924 - Pump Gas


Item# Description
1450 205cc SBF Competition Cylinder Head


$2,753.00

CHECKOUT NOW
  • Add To Wish List
    • 1458

    205cc SBF Competition Cylinder Head



    $2,753.00

    ADD TO CART
  • Add To Wish List
    		•

    Footnotes

    1. AFR Small Block Ford

      • We strongly recommend using 7/16" rocker studs with today's fast cam rates and RPM capabilities as 3/8" Rocker Studs can occasionally break.
      • Heads with 1.625" O.D springs will require some springs to be removed for access to some head bolts when installing the heads.
      • Heads are designed for 5/16" pushrods, Larger pushrods will not fit without clearancing and is not recommended since some areas are very thin. AFR recommends the use of .120" thick-wall pushrods.

    2. General Recommendations for AFR Cylinder Heads:

      • Bar Codes - Please keep the bar code & paperwork shipped with your head, these contain all the specs for your heads when calling AFR.
      • High Volume/Pressure Oil Pumps - If you are using a high volume or high pressure oil pump it can submerge the valve seals in oil causing smoking or oil consumption. Your block manufacturer or engine builder can recommend oil restrictions to the top end/valve train components.
      • Pushrods - Different length pushrods might be required, always check pushrod length. Check pushrod clearance with heads placed on the block before final assembly. Larger pushrods will not fit without clearancing and is not recommended since some areas are very thin. AFR recommends the use of .120" thick-wall pushrods.
      • Mills - Flat or angle mills could affect flow numbers and might require a thicker intake gasket.
      • Stud Girdles - Due to many available factory OEM and aftermarket style/variations your existing stud girdle may not fit (AFR heads require AFR Stud Girdles)
      • Boosted/Nitrous Applications - We strongly recommend considering Inconel exhaust valves and AFR's optional heavy duty intake valve for power adder applications. Since boosted or nitrous oxide applications accelerate RPM quickly, additional spring pressure is required. We strongly recommend upgrading your valve springs or increasing your valve spring pressures since boost pressure on the valve reduces spring tension. For example, 15lbs boost on a 2.125 OD valve reduces the springs closed seat pressure by approximately 40-45lbs.
      • All MARINE Applications - We strongly recommend Inconel exhaust valves & also offer a hard anodized coating to slow the effects of corrosion. Please see note on guide clearance below.
      • Valve Guide Clearance - Your AFR Heads come with proper guide clearance (.0012"-.0016") for most applications. Boosted/Nitrous or marine applications might require additional clearance and it is the customer's responsibility to verify proper clearance in these applications.
      • Valve Springs - Forced induction, nitrous oxide and cams with aggressive ramp rates may require additional spring pressure. We offer optional valve springs for these types of applications. AFR also recommends the use of billet cam cores and short travel Hydraulic Roller lifters which tolerate higher spring loads. Please don't hesitate to contact us directly if you question which spring is correct for your application.
      • AFR Titanium Valves - Might require lash caps and different length pushrods. Titanium valves are coated, do not grind valves because it removes the protective coating.
      • Piston to Valve - AFR assumes no responsibility for damage if the end user builds an engine without properly verifying he has enough piston to valve clearance (depth and radial clearance both checked). We recommend a minimum depth of .080" on the intake valve and .100" on the exhaust with a radial clearance of .020" minimum around the perimeter of each valve. Clay is recommended to visually verify both depth as well as radial clearance. Just checking depth is not enough, the position of the valve pocket must also be addressed. It is the customers responsibility to verify proper piston to valve clearance.
      • CNC Porting - Occasionally a 100% CNC ported head might have a very small area left "as cast", this in no way affects performance.
      • Shaft Mount Rockers - Shaft mount rockers might require additional clearance for proper pushrod fitment. Do not clearance the push rod area as the wall is .060" thick. If you use Jesel Shaft Mounts, AFR only recommends their Pro Series.
      • Comp Cams Pro Magnum Rockers - Typically these rocker arms do not clear a 1.500" O.D retainer. A lash cap is required to space up the rocker arm.
      • Spring Installation - To ease installation with 1.550" O.D or larger springs, 12 pt head bolt or studs are recommended for extra clearance. Beveled or ground washers might be needed (ARP #200-8504 comes with smaller O.D and doesn't need to be ground)
      • Valve Spring Installed Heights - AFR valve spring installed height spec is +/- .015 which is the smallest shim available for adjustment.
      • Rocker Arms - Use full roller rocker arms, roller tip rockers with stock style bodies are NOT recommended.

    joinmail-icon

     

    join our email list

    You’ll be first to know about Air Flow Research products, discounts and special events!