Enforcer As Cast
Our new 195cc SBC Enforcer cylinder heads are a budget friendly offering that is available as a “No Parts” head or can be ordered fully assembled with the same great components found in our higher end cylinder heads; such as ARP rockers studs, PAC Racing springs, AFR adjustable guide plates and our Stainless Steel valves.
These heads come with an As-Cast surface on the intake runnners, exhaust runners and combustion chambers. They are a perfect choice for anyone looking to upgrade from the factory Iron pieces. Available in straight or angled spark plug configurations. Sold as a single piece, 2 required per engine.
Included Components | |
As Cast Combustion Chambers | |
As Cast Exhaust Ports | |
As Cast Intake Ports | |
3-angle Valve Job |
|
8mm Bead Lock Intake Valve, 2.020" x 5.000" Overall Valve Length | |
8mm Bead Lock Exhaust Valve, 1.600" x 5.030" Overall Valve Length | |
PAC Racing Spring 1.290" OD Hydraulic Roller Dual Valve Spring, 140 lbs on seat, .600" maximum lift, Max RPM 6300-6500(upgrades available) |
|
7° Chrome Moly Retainers 1.245" O.D x .885" I.D x .655" I.D | |
7° Bead Lock Valve Keepers | |
ARP 3/8" Rocker Studs | |
Adjustable 5/16" Guide Plates | |
Viton Valve Seals .675" O.D x .513" I.D | |
Hardened Valve Spring O.D Locator 1.380" O.D x .570" I.D |
195cc As Cast Flow Chart | ||||||
.200 | .300 | .400 | .500 | .550 | .600 | |
Int | 133 | 188 | 226 | 250 | 251 | 251 |
Exh | 104 | 138 | 158 | 186 | 191 | 197 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
Our new 195cc SBC Enforcer cylinder heads are a budget friendly offering that is available as a “No Parts” head or can be ordered fully assembled with the same great components found in our higher end cylinder heads; such as ARP rockers studs, PAC Racing springs, AFR adjustable guide plates and our Stainless Steel valves.
These heads come with an As-Cast surface on the intake runnners, exhaust runners and combustion chambers. They are a perfect choice for anyone looking to upgrade from the factory Iron pieces. Available in straight or angled spark plug configurations. Sold as a single piece, 2 required per engine.
Included Components | |
As Cast Combustion Chambers | |
As Cast Exhaust Ports | |
As Cast Intake Ports | |
3-angle Valve Job |
|
8mm Bead Lock Intake Valve, 2.020" x 5.000" Overall Valve Length | |
8mm Bead Lock Exhaust Valve, 1.600" x 5.030" Overall Valve Length | |
PAC Racing Spring 1.290" OD Hydraulic Roller Dual Valve Spring, 140 lbs on seat, .600" maximum lift, Max RPM 6300-6500(upgrades available) |
|
7° Chrome Moly Retainers 1.245" O.D x .885" I.D x .655" I.D | |
7° Bead Lock Valve Keepers | |
ARP 3/8" Rocker Studs | |
Adjustable 5/16" Guide Plates | |
Viton Valve Seals .675" O.D x .513" I.D | |
Hardened Valve Spring O.D Locator 1.380" O.D x .570" I.D |
195cc As Cast Flow Chart | ||||||
.200 | .300 | .400 | .500 | .550 | .600 | |
Int | 133 | 188 | 226 | 250 | 251 | 251 |
Exh | 104 | 138 | 158 | 186 | 191 | 197 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
You’ll be first to know about Air Flow Research products, discounts and special events!