• Replacement SBC, SBF, LSX Viton Rubber Valve Stem Seal
• .530" x 8mm
• (Set of 16)

• SBC/SBF 8mm Street Exhaust Valve
• 1.600 x 4.950 OAL
• Stainless Steel
• (1 Piece) or (Set of 8)

• SBC Head Bolt Kit
• ARP #134-3701

• AFR SBC Exhaust Seat 1.696 O.D.

• Fel Pro #1604 SBC Valve Cover Gaskets

• SBC/SBF 8mm Intake Valve
• 2.050 x 5.000 OAL
• (1 Piece) or (Set of 8)

• Fel Pro SBC Head Gasket #1003
• Comes as a pair
• SBC 180cc-227cc

• Chevy Scorpion Blue Roller Rockers
• 3/8" x 1.6
• Will not fit center bolt valve covers

• Chevy Scorpion Blue Roller Rockers
• 3/8" x 1.5
• Will not fit center bolt valve covers

• Chevy Scorpion Blue Roller Rockers
• 7/16" x 1.5
• Will not fit center bolt valve covers

• Chevy Scorpion Blue Roller Rockers
• 7/16" x 1.6
• Will not fit center bolt valve covers

• SBC HS Roller Rockers
• .050 Offset
• 7/16" x 1.5
• AFR 227cc and 235cc only

• SBC HS Roller Rockers
• .050 Offset
• 7/16" x 1.6
• AFR 227cc and 235cc only

• SBC L98 Stud Girdle Eliminator 180cc, 195cc, 210cc, and 220cc
• Adjusting nut dependent on installed studs. Adjusting Nuts not included with stud girdle, must be purchased separately.
• Requires one of the following adjusting nuts:
  
• For 3/8 Studs: AFR #6216
• For 7/16 Studs: AFR #6214

• SBC Stud Girdles
• Offset - for AFR 227cc and 235cc heads only
• Adjusting nut dependent on installed studs. Adjusting Nuts not included with stud girdle, must be purchased separately.
• Requires the following adjusting nut:
  • For 7/16 Studs

• AFR SBC/LSX Intake Seat 2.200 O.D. x 1.750 I.D x .375" Tall

• Shim .015 1.450 O.D.
• (Set of 16)

• Head Bolt Washer Kit for ARP head bolts.

• Shim .060 1.450 O.D.
• (Set of 16)

• AFR 195,210,227 LT4 Intake Gasket

• SBC Head Stud Kit
• 12 Point Nuts
• ARP #234-4301

• SBC LT1 Head Gasket
• Fits AFR SBC LT 185cc-210cc & 227cc

Fel-Pro: 1004

Bore (in): 4.190 in.

Bore (mm): 106.426mm

Gasket Material: Steel core laminate

Compressed Thickness (in): 0.041 in.

Compressed Volume (cc): 9.200cc

Notes: This gasket does not have steam holes for 400 street engines, designed only for race use in those applications. Can use on aluminum block with liners. Pre-flattened steel wire ring.

Fits: AFR SBC 235cc-245cc

Fel-Pro: 1014

Bore (in):4.200 in.

Bore (mm):106.680mm

Gasket Material:Stainless steel core

Compressed Thickness (in):0.039 in.

Compressed Volume (cc):8.854cc

Notes:Has 400 steam holes. Can use on aluminum block with liners. Pre-flattened steel wire ring. Also suitable for marine applications.

Fits: AFR SBC 180-245cc

• Shim .030 1.450 O.D.
• (Set of 16)

• AFR CNC Engraved SBC Tall Valve Cover
• Black Powder Coat
• Includes Rubber Grommets & Baffles for PCV

• AFR CNC Engraved SBC Tall Valve Cover
• Polished Finish
• Includes Rubber Grommets & Baffles for PCV

• AFR CNC Engraved SBC Valve Cover
• Standard Height
• Black Powder Coat
• Includes Rubber Grommets & Baffles for PCV

• AFR CNC Engraved SBC Valve Cover
• Standard Height
• Polished Finish
• Includes Rubber Grommets & Baffles for PCV

AFR lightweight Phenolic carburetor spacers for 4150 style carburetors are available in an 1" thick open or tapered four hole version. Both versions will act as a heat barrier between the manifold and carburetor to keep the fuel in the float bowls cooler,