We are proud to announce the release of 3 NEW camshafts to compliment our 260cc Mongoose LS3 cylinder heads. Whether you are got a Gen5 Camaro or a C6 Corvette, we can take your setup from mild to wild with one of these new bump sticks. All grinds are made using a billet steel core and are suitable for factory displacement engines ranging from 5.7 to 6.2. Installation will require the use of a 3 bolt style cam gear and bolts, AFR part #6010 (gear) and AFR part #6011 (3 bolts).
RPM Range: 2000-6500 RPM
Vacuum @ Idle: 14" @ 800 RPM
LSA: 115+4
Duration @ 50: Intake - 223 / Exhaust - 231.
Valve Lift: Intake - 604 / Exhaust - 595.
Test Engine: Stock GM 6.2L LS3 short block with no modifications. AFR LS3 260cc Square port heads part #1845. AFR hydraulic roller cam part #’s 6012, 6013 & 6014 with stock rocker arms. Stock L92 intake with 90mm throttle body. Hooker headers with 1 7/8” primaries connected to Superflow dyno mufflers.
CARB Status: This product is not legal for sale or use on emission-controlled vehicles and intended for dedicated race vehicles only.
We are proud to announce the release of 3 NEW camshafts to compliment our 260cc Mongoose LS3 cylinder heads. Whether you are got a Gen5 Camaro or a C6 Corvette, we can take your setup from mild to wild with one of these new bump sticks. All grinds are made using a billet steel core and are suitable for factory displacement engines ranging from 5.7 to 6.2. Installation will require the use of a 3 bolt style cam gear and bolts, AFR part #6010 (gear) and AFR part #6011 (3 bolts).
RPM Range: 2000-6500 RPM
Vacuum @ Idle: 14" @ 800 RPM
LSA: 115+4
Duration @ 50: Intake - 223 / Exhaust - 231.
Valve Lift: Intake - 604 / Exhaust - 595.
Test Engine: Stock GM 6.2L LS3 short block with no modifications. AFR LS3 260cc Square port heads part #1845. AFR hydraulic roller cam part #’s 6012, 6013 & 6014 with stock rocker arms. Stock L92 intake with 90mm throttle body. Hooker headers with 1 7/8” primaries connected to Superflow dyno mufflers.
CARB Status: This product is not legal for sale or use on emission-controlled vehicles and intended for dedicated race vehicles only.
We are proud to announce the release of 3 NEW camshafts to compliment our 260cc Mongoose LS3 cylinder heads. Whether you are got a Gen5 Camaro or a C6 Corvette, we can take your setup from mild to wild with one of these new bump sticks. All grinds are made using a billet steel core and are suitable for factory displacement engines ranging from 5.7 to 6.2. Installation will require the use of a 3 bolt style cam gear and bolts, AFR part #6010 (gear) and AFR part #6011 (3 bolts).
RPM Range: 2,500-7,000 RPM
Vacuum @ Idle: 12" @ 900 RPM
LSA: 114+3
Duration @ 50: Intake - 227 / Exhaust - 235.
Valve Lift: Intake - 620 / Exhaust - 612.
Test Engine: Stock GM 6.2L LS3 short block with no modifications. AFR LS3 260cc Square port heads part #1845. AFR hydraulic roller cam part #’s 6012, 6013 & 6014 with stock rocker arms. Stock L92 intake with 90mm throttle body. Hooker headers with 1 7/8” primaries connected to Superflow dyno mufflers.
CARB Status: This product is not legal for sale or use on emission-controlled vehicles and intended for dedicated race vehicles only.
We are proud to announce the release of 3 NEW camshafts to compliment our 260cc Mongoose LS3 cylinder heads. Whether you are got a Gen5 Camaro or a C6 Corvette, we can take your setup from mild to wild with one of these new bump sticks. All grinds are made using a billet steel core and are suitable for factory displacement engines ranging from 5.7 to 6.2. Installation will require the use of a 3 bolt style cam gear and bolts, AFR part #6010 (gear) and AFR part #6011 (3 bolts).
RPM Range: 2,500-7,000 RPM
Vacuum @ Idle: 12" @ 900 RPM
LSA: 114+3
Duration @ 50: Intake - 227 / Exhaust - 235.
Valve Lift: Intake - 620 / Exhaust - 612.
Test Engine: Stock GM 6.2L LS3 short block with no modifications. AFR LS3 260cc Square port heads part #1845. AFR hydraulic roller cam part #’s 6012, 6013 & 6014 with stock rocker arms. Stock L92 intake with 90mm throttle body. Hooker headers with 1 7/8” primaries connected to Superflow dyno mufflers.
CARB Status: This product is not legal for sale or use on emission-controlled vehicles and intended for dedicated race vehicles only.
We are proud to announce the release of 3 NEW camshafts to compliment our 260cc Mongoose LS3 cylinder heads. Whether you are got a Gen5 Camaro or a C6 Corvette, we can take your setup from mild to wild with one of these new bump sticks. All grinds are made using a billet steel core and are suitable for factory displacement engines ranging from 5.7 to 6.2. Installation will require the use of a 3 bolt style cam gear and bolts, AFR part #6010 (gear) and AFR part #6011 (3 bolts).
RPM Range: 3,000-7,200 RPM
Vacuum @ Idle: 8" @ 1050 RPM
LSA: 112+3
Duration @ 50: Intake - 232 / Exhaust - 244.
Valve Lift: Intake - 629 / Exhaust - 612.
Test Engine: Stock GM 6.2L LS3 short block with no modifications. AFR LS3 260cc Square port heads part #1845. AFR hydraulic roller cam part #’s 6012, 6013 & 6014 with stock rocker arms. Stock L92 intake with 90mm throttle body. Hooker headers with 1 7/8” primaries connected to Superflow dyno mufflers.
CARB Status: This product is not legal for sale or use on emission-controlled vehicles and intended for dedicated race vehicles only.
We are proud to announce the release of 3 NEW camshafts to compliment our 260cc Mongoose LS3 cylinder heads. Whether you are got a Gen5 Camaro or a C6 Corvette, we can take your setup from mild to wild with one of these new bump sticks. All grinds are made using a billet steel core and are suitable for factory displacement engines ranging from 5.7 to 6.2. Installation will require the use of a 3 bolt style cam gear and bolts, AFR part #6010 (gear) and AFR part #6011 (3 bolts).
RPM Range: 3,000-7,200 RPM
Vacuum @ Idle: 8" @ 1050 RPM
LSA: 112+3
Duration @ 50: Intake - 232 / Exhaust - 244.
Valve Lift: Intake - 629 / Exhaust - 612.
Test Engine: Stock GM 6.2L LS3 short block with no modifications. AFR LS3 260cc Square port heads part #1845. AFR hydraulic roller cam part #’s 6012, 6013 & 6014 with stock rocker arms. Stock L92 intake with 90mm throttle body. Hooker headers with 1 7/8” primaries connected to Superflow dyno mufflers.
CARB Status: This product is not legal for sale or use on emission-controlled vehicles and intended for dedicated race vehicles only.
• LSX Solid Stem Valve 2.165
• (1 Piece) or (Set of 8)
• LSX Solid Stem Valve 2.165
• (1 Piece) or (Set of 8)
AFR 7212 valves come standard in 260cc LS3 cylinder heads.
AFR 7212 valves come standard in 260cc LS3 cylinder heads.
AFR 7214 valves come standard in 260cc LS3 cylinder heads.
AFR 7214 valves come standard in 260cc LS3 cylinder heads.
AFR 7241 valves come standard in 238cc LS3 Enforcer cylinder heads.
AFR 7241 valves come standard in 238cc LS3 Enforcer cylinder heads.
AFR 7213 valves comes as an upgrade in 260cc LS3 cylinder heads.
AFR 7213 valves comes as an upgrade in 260cc LS3 cylinder heads.
AFR's 210 LS1 Enforcer Cylinder heads feature our Permanent Mold “As-Cast” Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port location/performance. This budget friendly head is perfect for your OEM engine operating below 6300 RPM. They come fully assembled with the identical components found in our higher end CNC ported cylinder heads; such as PAC Racing springs, viton valve seals, machined bead valve locks (not stamped), hardened spring seats and our one piece 8mm 21 4N Stainless Steel valves. They are available without any parts for the DIY. Sold as a single piece, 2 are required per engine. Please see footnotes for additional information.
| Included Components | |
| As Cast Combustion Chambers | |
| As Cast Exhaust Ports | |
| As Cast Intake Ports | |
|
3-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.000” x 4.900” O.A.L. | |
| 8mm Bead Lock Exhaust Valve, 1.570” x 4.915" Overall Valve Length | |
|
PAC Racing Spring 1.290" OD Hydraulic Roller Dual Valve Spring, 140 lbs on seat, .600" maximum lift, Max RPM 6300-6500 |
|
| 7° Chrome Moly Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 7° Bead Lock Valve Keepers | |
| Viton Valve Seals .620" O.D x .490" I.D | |
| Hardened Valve Spring O.D Locator 1.380" O.D x .570" I.D | |
| 210cc Street Head Flow Chart | ||||||
| .200 | .300 | .400 | .500 | .550 | .600 | |
| Int | 136 | 199 | 246 | 272 | 276 | 265 |
| Exh | 93 | 140 | 180 | 204 | 211 | 215 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| Intake Port Volume |
210cc
|
| Intake Port Dimension |
3.190"H x 1.015"W x5/16 top 3/8" bottom
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
82cc
|
| Exhaust Port Dimension |
1.400" H x 1.660" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size |
64cc
|
| Valve Angle |
15°
|
| Valve Spring Pocket Diameter |
1.500" O.D
|
| Max Valve Spring Pocket Machining |
1.500" O.D
|
| Warning:Do not machine spring pad any deeper. | |
| Deck Thickness |
0.425"
|
| Minimum Bore Diameter |
3.780""
|
| Flat Mill |
.006" per cc 58cc Maximum
|
| Spark Plug Dimensions |
14mm x .750" w/Tapered seat
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Head Gasket |
Factory GM LS2
|
| Intake Port Gasket |
GM or FAST
|
| Exhaust Port Gasket |
GM#12558573
|
| Head Bolts (97-03) | |
| Head Studs (97-03) | |
| Head Bolts (04+) | |
| Head Studs (04+) | |
| Head Bolt Washers, Manley | |
| Suggested Manifold |
FAST 90mm, 92mm, or 102mm
|
| Spark Plug Starting Range |
NGK TR55
|
AFR's 210 LS1 Enforcer Cylinder heads feature our Permanent Mold “As-Cast” Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port location/performance. This budget friendly head is perfect for your OEM engine operating below 6300 RPM. They come fully assembled with the identical components found in our higher end CNC ported cylinder heads; such as PAC Racing springs, viton valve seals, machined bead valve locks (not stamped), hardened spring seats and our one piece 8mm 21 4N Stainless Steel valves. They are available without any parts for the DIY. Sold as a single piece, 2 are required per engine. Please see footnotes for additional information.
| Included Components | |
| As Cast Combustion Chambers | |
| As Cast Exhaust Ports | |
| As Cast Intake Ports | |
|
3-angle Valve Job |
|
| 8mm Bead Lock Intake Valve 2.000” x 4.900” O.A.L. | |
| 8mm Bead Lock Exhaust Valve, 1.570” x 4.915" Overall Valve Length | |
|
PAC Racing Spring 1.290" OD Hydraulic Roller Dual Valve Spring, 140 lbs on seat, .600" maximum lift, Max RPM 6300-6500 |
|
| 7° Chrome Moly Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 7° Bead Lock Valve Keepers | |
| Viton Valve Seals .620" O.D x .490" I.D | |
| Hardened Valve Spring O.D Locator 1.380" O.D x .570" I.D | |
| 210cc Street Head Flow Chart | ||||||
| .200 | .300 | .400 | .500 | .550 | .600 | |
| Int | 136 | 199 | 246 | 272 | 276 | 265 |
| Exh | 93 | 140 | 180 | 204 | 211 | 215 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| Intake Port Volume |
210cc
|
| Intake Port Dimension |
3.190"H x 1.015"W x5/16 top 3/8" bottom
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
82cc
|
| Exhaust Port Dimension |
1.400" H x 1.660" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size |
64cc
|
| Valve Angle |
15°
|
| Valve Spring Pocket Diameter |
1.500" O.D
|
| Max Valve Spring Pocket Machining |
1.500" O.D
|
| Warning:Do not machine spring pad any deeper. | |
| Deck Thickness |
0.425"
|
| Minimum Bore Diameter |
3.780""
|
| Flat Mill |
.006" per cc 58cc Maximum
|
| Spark Plug Dimensions |
14mm x .750" w/Tapered seat
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Head Gasket |
Factory GM LS2
|
| Intake Port Gasket |
GM or FAST
|
| Exhaust Port Gasket |
GM#12558573
|
| Head Bolts (97-03) | |
| Head Studs (97-03) | |
| Head Bolts (04+) | |
| Head Studs (04+) | |
| Head Bolt Washers, Manley | |
| Suggested Manifold |
FAST 90mm, 92mm, or 102mm
|
| Spark Plug Starting Range |
NGK TR55
|
AFR's 210 LS1 Enforcer Cylinder heads feature our Permanent Mold “As-Cast” Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port location/performance. This budget friendly head is perfect for your OEM engine operating below 6300 RPM. They come fully assembled with the identical components found in our higher end CNC ported cylinder heads; such as PAC Racing springs, viton valve seals, machined bead valve locks (not stamped), hardened spring seats and our one piece 8mm 21 4N Stainless Steel valves. They are available without any parts for the DIY. Sold as a single piece, 2 are required per engine. Please see footnotes for additional information.
| Included Components | |
| As Cast Combustion Chambers | |
| As Cast Exhaust Ports | |
| As Cast Intake Ports | |
|
3-angle Valve Job |
|
| 8mm Bead Lock Intake Valve, 2.020” x 4.900" Overall Valve Length | |
| 8mm Bead Lock Exhaust Valve, 1.600” x 4.900" Overall Valve Length | |
|
PAC Racing Spring 1.290" OD Hydraulic Roller Dual Valve Spring, 140 lbs on seat, .600" maximum lift, Max RPM 6300-6500 |
|
| 7° Chrome Moly Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 7° Bead Lock Valve Keepers | |
| Viton Valve Seals .620" O.D x .490" I.D | |
| Hardened Valve Spring O.D Locator 1.380" O.D x .570" I.D | |
| 210cc Street Head Flow Chart | ||||||
| .200 | .300 | .400 | .500 | .550 | .600 | |
| Int | 148 | 209 | 253 | 265 | 268 | 268 |
| Exh | 105 | 150 | 180 | 199 | 204 | 207 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| Intake Port Volume |
210cc
|
| Intake Port Dimension |
3.190"H x 1.015"W x5/16 top 3/8" bottom
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
82cc
|
| Exhaust Port Dimension |
1.400" H x 1.660" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size |
64cc
|
| Valve Angle |
15°
|
| Valve Spring Pocket Diameter |
1.500" O.D
|
| Max Valve Spring Pocket Machining |
1.500" O.D
|
| Warning:Do not machine spring pad any deeper. | |
| Deck Thickness |
0.425"
|
| Minimum Bore Diameter |
3.900"
|
| Flat Mill |
.006" per cc 58cc Maximum
|
| Spark Plug Dimensions |
14mm x .750" w/Tapered seat
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Head Gasket |
Factory GM LS2
|
| Intake Port Gasket |
GM or FAST
|
| Exhaust Port Gasket |
GM#12558573
|
| Head Bolts (97-03) | |
| Head Studs (97-03) | |
| Head Bolts (04+) | |
| Head Studs (04+) | |
| Head Bolt Washers, Manley | |
| Suggested Manifold |
FAST 90mm, 92mm, or 102mm
|
| Spark Plug Starting Range |
NGK TR55
|
AFR's 210 LS1 Enforcer Cylinder heads feature our Permanent Mold “As-Cast” Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port location/performance. This budget friendly head is perfect for your OEM engine operating below 6300 RPM. They come fully assembled with the identical components found in our higher end CNC ported cylinder heads; such as PAC Racing springs, viton valve seals, machined bead valve locks (not stamped), hardened spring seats and our one piece 8mm 21 4N Stainless Steel valves. They are available without any parts for the DIY. Sold as a single piece, 2 are required per engine. Please see footnotes for additional information.
| Included Components | |
| As Cast Combustion Chambers | |
| As Cast Exhaust Ports | |
| As Cast Intake Ports | |
|
3-angle Valve Job |
|
| 8mm Bead Lock Intake Valve, 2.020” x 4.900" Overall Valve Length | |
| 8mm Bead Lock Exhaust Valve, 1.600” x 4.900" Overall Valve Length | |
|
PAC Racing Spring 1.290" OD Hydraulic Roller Dual Valve Spring, 140 lbs on seat, .600" maximum lift, Max RPM 6300-6500 |
|
| 7° Chrome Moly Retainers 1.245” O.D x .885” I.D x .655” I.D | |
| 7° Bead Lock Valve Keepers | |
| Viton Valve Seals .620" O.D x .490" I.D | |
| Hardened Valve Spring O.D Locator 1.380" O.D x .570" I.D | |
| 210cc Street Head Flow Chart | ||||||
| .200 | .300 | .400 | .500 | .550 | .600 | |
| Int | 148 | 209 | 253 | 265 | 268 | 268 |
| Exh | 105 | 150 | 180 | 199 | 204 | 207 |
Test conducted at 28" of water (pressure) on Superflow 1020
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
| Specifications & Features: | |
| Material |
A356 Aluminum
|
| Intake Port Volume |
210cc
|
| Intake Port Dimension |
3.190"H x 1.015"W x5/16 top 3/8" bottom
|
| Intake Port Location |
Stock
|
| Exhaust Port Volume |
82cc
|
| Exhaust Port Dimension |
1.400" H x 1.660" W
|
| Exhaust Port Location |
Stock
|
| Combustion Chamber Size |
64cc
|
| Valve Angle |
15°
|
| Valve Spring Pocket Diameter |
1.500" O.D
|
| Max Valve Spring Pocket Machining |
1.500" O.D
|
| Warning:Do not machine spring pad any deeper. | |
| Deck Thickness |
0.425"
|
| Minimum Bore Diameter |
3.900"
|
| Flat Mill |
.006" per cc 58cc Maximum
|
| Spark Plug Dimensions |
14mm x .750" w/Tapered seat
|
|
CARB Status: THESE PRODUCTS ARE ILLEGAL TO OPERATE ON ANY PUBLIC HIGHWAY. THIS MEANS ANY PUBLIC PAVED OR UNPAVED ROADWAY OR IN A PUBLIC PARK. THESE PRODUCTS ARE ONLY LEGAL IF USED ON A DEDICATED RACING VEHICLE. VIOLATION ARE SUBJECT TO A MAXIMUM PENALTY OF $37,500 PER VIOLATION PER VEHICLE, REVOCATION OF REGISTRATION BY DMV, LOSS OF USE ON PUBLIC RIGHT OF WAYS AND PROOF OF CORRECTION OF THE TAMPERING. |
|
| Recommended Components: | |
| Head Gasket |
Factory GM LS2
|
| Intake Port Gasket |
GM or FAST
|
| Exhaust Port Gasket |
GM#12558573
|
| Head Bolts (97-03) | |
| Head Studs (97-03) | |
| Head Bolts (04+) | |
| Head Studs (04+) | |
| Head Bolt Washers, Manley | |
| Suggested Manifold |
FAST 90mm, 92mm, or 102mm
|
| Spark Plug Starting Range |
NGK TR55
|
You’ll be first to know about Air Flow Research products, discounts and special events!
Copyright ©2026 Airflow Research | All rights reserved.
Powered & Designed by Admark Automotive
Part# 6845